Benchtop Mortiser 1/2″ Chuck Capacity 1/2Hp 34-255 Rikon

$529.00

SKU: 9700048 Categories: ,

Description

Benchtop Mortiser 1/2″ Chuck Capacity 1/2Hp 34-255 RikonManufactured in China.

Description:-

How do you drill square holes? With a mortiser! These specially designed, drill press-type machines use a drill bit housed inside of a square chisel to perform this feat. The drill bit starts boring a hole in your wood, then immediately the square chisel follows – forming the square shape, while its interior bevel forces the excess wood that is remaining in the corner sections into the spinning drill bit. The drill’s flutes then carry away the cut chips up and out of the mortise. All this is done in seconds, permitting you to cut accurate mortises for furniture, cabinetry, doors, shutters and more. RIKON’s Benchtop Mortisers are available in two models, each are wired for use with 3-wire 120V electrical receptacles.

Benchtop Mortising Machine #34-255 provides a wide, machined cast iron base with pull-out side extensions for extra work piece support. Innovative roller clamps keep your stock against the back fence, but allow the work to move left or right without having to unclamp the rollers. Fence is easily positioned with its geared lever. Operating handle is spring loaded, so that it can be quickly adjusted to different

Features:-
• Powerful 1/2 HP motors will handle cutting the hardest wood
• Dovetail column ways give smooth vertical travel for boring
• Piston-assist feed return regulates plunge and release speed for safety
• Long, multi-position handle gives great leverage for advancing the chisels
• Keyed Chucks have guards for added safety
• Adjustable depth stop provides extra control for drilling
• Adjustable length stops keep repeat/multiple drillings consistent
• Machined tables give solid support of work pieces
• Hold downs keep work from lifting when chisels are withdrawn
• Cast iron fences adjust forward and back for setting of drill locations
• Cast iron base, column and housing reduces vibration
• Holes in the base for mounting to a bench or stand
• Tool rest holds chisels and tools for quick access
• Housing is bored to hold 1” shanks, and includes 5/8” & 3/4” bushings
• Includes 1/4”, 5/16”, 3/8” and 1/2” chisels and drill bits
• Safety on/off switch with removable security tab

Specifications:-

Motor
Horsepower 1/2 HP TEFC
Amps 3.6
Volts 120V, 60 Hz
RPM 1,700
 
Specifications
Type Benchtop
Chisel Shank Diameter 1”(With 5/8” & 3/4” Bushings)
Chisel Stroke 5-3/4”
Chisel Range (Included) 1/4”, 5/16”, 3/8”, 5/8”
Hold Down Length from Fence 3”
Max. Hold Down Stock Height 5”
Roller Clamps Diameter (2) 2-1/2”
Maximum Stock Width 8-1/2”
Chuck Type Keyed
Chuck Capacity 1/2”
Table Size 10-3/4” x 12-1/2”
Side Extension Size (2) 1-1/4” x 6-13/16”
Table Width with Extensions 26-5/8”
Fence Size 2-5/8” x 13-3/4”
Overall
Height 30-3/4”
Width 27-3/8”
Depth 22”
Base Size 13-3/4” x 17-3/4”
Net Weight 84 lbs.

 

*Specifications are subject to change

*Product image shown may vary from actual product

Additional information

Brand

Size